STRATA_HEAT Smart LCD Thermostat
1.Securely seat the screen into place and make sure the breaker is turned on to boot up
the unit. If setup was previously attempted, it is best to reset the thermostat and start
over.
2. To Reset: Click lock Icon > three lines > settings > advanced settings > click blue
“Reset” at the bottom of the screen. Unit will Reset
3. Starts up asking for language, system type (Electric Floor), type of floor
(Tile/Stone), Application- Control (floor), Limit (None), the QR Code will appear
next-click “Dismiss”, Then set the time-click “accept”, Then set the date-click
“accept”. The setup is complete. See the
for more information and functions.
STRATA_HEAT Thermostat
1.Securely seat the screen into place and make sure the breaker is turned on to boot up
the unit. If setup was previously attempted, it is best to reset the thermostat and start
over.
2. To Reset: Click lock Icon > three lines > settings > advanced settings > click blue
“Reset” at the bottom of the screen. Unit will Reset
3. The unit will set up and for information to be selected (i.e. Language, Power Setting,
Time, Date, etc.). Select and enter the information as it pertains to your situation.
When asked to setup Wi-Fi Network choose ‘No’ so that the unit runs manually. After
the initial options are selected you will notice the Wi-Fi service bars with an ‘X’ on the
screen. This is an indication that the unit is running manually and not connected to Wi-Fi. See the
for more information and functions.
Technical Data Sheets are subject to change without notice. For latest revision, check our website at
TDS 263.doc
R 14 October 2022
