3. Operation
(1) Day & Time setting
1) Open Battery Hatch.
2) Set slide switch to 'MASTER'.
3) Insert two CR123 batteries into the battery
compartment.
4) Set Battery Hatch to case.
5) Push 'RESET' button.
* Display all of LCD segments and flash red LED light.
* Blinking LF receiving mark in LCD.
6) Push MODE button more than 2 seconds, then blinking Year.
7) Push UP or DOWN button to desired year. Available year is 2000 – 2099
8) Push MODE button then blinking day.
9) Push UP or DOWN button to desired day. Date is set in automatically.
10) Push MODE button then blinking time
11) Push UP or DOWN button to desired time.
12) Push MODE button then setting is completed.
Push MODE button more than 2 seconds
Blinking year
Push UP or DOWN button to desired year
Push MODE button
Blinking day
Push UP or DOWN button to desired day
Push MODE button
Blinking time
Push UP or DOWN button to desired time
Push MODE button then return normal display
(2) Transmitting Time Link Signal
1) Push TRANSMIT button, then start transmitting
of Time Link Signal in one hour.
During transmitting Time Link Signal, blinking
Time Link mark
in LCD.
2) Push RECEIVING button (B button in the right
figure) in TIME LINK clock, the clock will start
receiving TIME LINK signal.
