background image

2100HD User

s Guide 

11 

 

Limited One Year Warranty 

Lathem warrants the hardware products described in this guide against defects in 
material and workmanship for a period of 

one year

 from date of original purchase 

from Lathem or from an authorized Lathem reseller. The conditions of this 
warranty and the extent of the responsibility of Lathem Time Corporation 

(“Lathem”) under this warranty are listed below.

 This warranty will become void 

when service performed by anyone other than an approved Lathem warranty 
service dealer results in damage to the product. 
1.

This warranty does not apply to any product which has been subject to
abuse, neglect, or accident, or which has had the serial number altered or
removed, or which has been connected, installed, adjusted, or repaired
other than in accordance with instructions furnished by Lathem.

2.

This warranty does not cover dealer labor cost for removing and
reinstalling the machine for repair, or any expendable parts that are
readily replaced due to normal use.

3.

The sole responsibility of Lathem under this warranty shall be limited to
repair of this product, or replacement thereof, at the sole discretion of
Lathem.

4.

If it becomes necessary to send the product or any defective part to
Lathem or any authorized service dealer, the product must be shipped in
its original carton or equivalent, fully insured with shipping charges
prepaid. Lathem will not assume any responsibility for any loss or damage
incurred in shipping.

5.

WARRANTY DISCLAIMER AND LIMITATION OF LIABILITY: Except only the
limited express warranty set forth above, the products are sold with no
expressed or implied warranties of any kind, and the implied warranties of
merchantability and fitness for a particular purpose are hereby expressly
disclaimed.   No warranties are given with respect to products purchased
other than from Lathem or an authorized Lathem reseller and any such
products are purchased "as is, with all faults."  In no event will Lathem be
liable for any direct, indirect, special, incidental or consequential damages
arising out of or in connection with the delivery, use or inability to use, or
performance of this product.  In the event any limited remedy given herein
shall be deemed to have failed of its essential purpose, Lathem's
maximum liability shall be to refund the purchase price upon return of the
product. 

6.

Proof of date of purchase from Lathem or an authorized Lathem reseller is
required for warranty service on this product.

7.

This Warranty grants specific legal rights. Additional legal rights, which may
vary by locale, may also apply.

8.

Should any difficulties arise with the performance of this product during
warranty contact Lathem at 404-691-0400 o

www.lathem.com

Summary of Contents for 2100HD












Reviews: