background image

ENGLISH

Lathem warrants the hardware products described in this guide against defects in material and 
workmanship for a period of 

one year

 from date of original purchase from Lathem or from an 

authorized Lathem reseller. The conditions of this warranty and the extent of the responsibility 
of Lathem Time Corporation ("Lathem") under this warranty are listed below.

1. This warranty will become void when service performed by anyone other than an approved   

Lathem warranty service dealer results in damage to the product.

2. This warranty does not apply to any product which has been subject to abuse, neglect, or 

accident, or which has had the serial number altered or removed, or which has been 
connected, installed, adjusted, or repaired other than in accordance with instructions 
furnished by Lathem.

3. This warranty does not cover dealer labor cost for removing and reinstalling the machine for 

repair, or any expendable parts that are readily replaced due to normal use.

4. The sole responsibility of Lathem under this warranty shall be limited to repair of this 

product, or replacement thereof, at the sole discretion of Lathem.

5. If it becomes necessary to send the product or any defective part to Lathem or any authorized 

service dealer, the product must be shipped in its original carton or equivalent, fully insured 
with shipping charges prepaid. Lathem will not assume any responsibility for any loss or 
damage incurred in shipping.

6. WARRANTY DISCLAIMER AND LIMITATION OF LIABILITY: Except only the limited 

express warranty set forth above, the products are sold with no expressed or implied 
warranties of any kind, and the implied warranties of merchantability and fitness for a 
particular purpose are hereby expressly disclaimed.   No warranties are given with respect to 
products purchased other than from Lathem or an authorized Lathem reseller and any such 
products are purchased "as is, with all faults."  In no event will Lathem be liable for any 
direct, indirect, special, incidental or consequential damages arising out of or in connection 
with the delivery, use or inability to use, or performance of this product.  In the event any  
limited remedy given herein shall be deemed to have failed of its essential purpose, Lathem's 
maximum liability shall be to refund the purchase price upon return of the product.

7. Proof of date of purchase from Lathem or an authorized Lathem reseller is required for 

warranty service on this product.

8. This Warranty grants specific legal rights. Additional legal rights, which may vary by locale, 

may also apply.

9. Should any difficulties arise with the performance of this product during warranty, or with 

any Lathem authorized service centers, contact Lathem Time at the address below.

Lathem Time

200 Selig Drive, SW, Atlanta, GA  30336

404-691-0405

www.lathem.com

Copyright © 2005 Lathem Time Corporation. All rights reserved.

Limited One-Year Warranty

35

Summary of Contents for 1500E





































Reviews: