Maintenance
Bi-Annual
5-4
8/18/20
Maintenance
5
5.11 Bi-Annual
Replace fuel lines and clamps.
1
Replace radiator hoses and clamps.
1
Replace battery.
5.12 Urethane Bushings
Bolts holding urethane bushings must remain tight. Failure to keep
these spacers tight will result in premature wear on the bolts, and
equipment damage.
Urethane bushings ride on spacers that fit between the rotating pieces of framework, held
tightly in place with bolts.
It is important that the spacers remain tight between the
framework at all times.
Ensure that ALL bolts associated with urethane bushings are tight at all times.
Urethane bushing applications may be associated with grease points.
The grease, in these cases, is used to protect the moving parts from corrosion due to
water or other contaminants, and is not used for friction reduction.
Ensure grease fills the cavity to prevent infiltration
LT0091B
.
1. Refer to the Engine Operator’s Manual accompanying this manual.