Maintenance
First 25 Operating Hours
Maintenance
Lastec//021819
5-3
5
Verify proper installation, operation, and unobstructed flow of grass chute.
Inspect entire Lastec Mower for loose or entangled parts, debris, obstructions, mis-
placed tools, or any other possible safety hazards, equipment hazards or projectile
hazards. Clean off decks of any dirt, grease, or oil.
Depending on current cutting conditions, brush out and clean the radiators and
hood grills periodically during the day to ensure proper flow of cooling air.
5.3
First 25 Operating Hours
Change the hydraulic oil and filter.
5.4
First 50 Operating Hours
Change engine oil and filter.
1
5.5
Every 50 Operating Hours
Grease all blade spindle bearing housings. Fill until grease purges from weep hole
in bearing housing.
Inspect all bushings for wear. Replace as needed.
Check and clean if necessary any debris that may have accumulated during
operation.
5.6
Every 100 Operating Hours
Inspect engine fuel lines and clamps. Replace as needed.
Inspect air cleaner and filter elements. Replace as needed.
1
Inspect engine fan and alternator belt. Replace as needed.
5.7
Every 200 Operating Hours
Change engine oil and filter.
1
1. Refer to the
Engine Operator’s Manual
accompanying this manual.
Summary of Contents for 2561C
