- 15 -
When the product is installed in a basement or
in a wet or damp place
•
In the case that the product is installed in a
basement or in a wet or damp place, purchase an
earth leakage circuit breaker from an agent or
after-sales service center and then connect it to
the outlet. Electric leakage breaker.
Install the product indoors
•
It is indoor use only. If it is installed outdoors, the
product may be damaged or its cooling efficiency
may be decreased.
Install the product on the firm and even floor
•
The unstable installation may result in vibration
and noise of the product. If the floor where the
product is supposed to be installed is not flat, put a
strong board on it.
•
Fasten the product not to be shaken by turning the
height control screws of fixing legs to the left.
Install the product under a shelf or where
there is nothing to fall down on the top.
Install it in a well-ventilated area
•
As cooling efficiency gets better in the well-
ventilated area, allow adequate space around the
refrigerator for good air circulation as follows.
E.L.B
Installation
Turn the screw to the left to
increase the height of product or
turn it to the right to decrease it.
Over 50cm
over 15cm
Avoid the place where there is much corrosive gas
to install it
•
If the ambient temperature is high, cooling
efficiency will be reduced and electric fee will be
increased.
•
The color of its appearance may be changed or its
longevity may be reduced by briquette or corrosive gas.
over 10cm
Summary of Contents for LEFT-1B/C-900
