Installation
Maintenance & Cleaning
1. INDOOR USE ONLY
•
This unit is intended for indoor use only.
2. FOR LOCATION
•
Be sure that the location is strong enough to support the total weights of the unit and the content.
•
Keep the unit away from sunlight and other heat generating equipment.
•
The minimum clearance between the back of the unit and the wall should be 7 inches at least.
3. INSTALLING CASTORS
•
Be sure that castors with brake should be installed in front.
4. LEVELING
•
The unit should be leveled to provide adequate drainage.
5. ELECTRICAL CONNECTION
•
The unit should be plugged into a 220V/60Hz, grounded wall receptacle to
prevent electrical shock and fire hazards.
•
Do not plug other electrical units into same wall receptacle this unit is plugged into.
•
Do not use an extension cord.
•
Compressor warranties are void if the compressor burns out due to low voltage.
1. To maintain proper refrigeration performance, the condenser fins should be
checked monthly and clean with a soft brush or vacuum cleaner as needed.
2. Wait at least 6mimutes after unplugging the unit before plugging in
.
3. The interior and exterior of the unit can be cleaned using plugging in water.
•
Do not use an abrasive cleaners to avoid scratches on the surfaces.
4. The door-gasket should be cleaned to avoid maintain proper sealing.
4
