Table Of Contents
1 - Introduction
1.1
1.2
1 - Introduction
1.1 - Your New CR-55
1.2 - Shipping Damage Inspection
Remove the machine from the carton and inspect for
any shipping damage. If any damage is present, report
the damage to the carrier immediately; failure to do so
may void any warranties.
Page 01
Page 01
R
Page 01
Your New CR-55..................................
Shipping Damage Inspection...............
2 - Safety
2.1
2.2
Page 01
Page 02
Safety Instructions................................
Warning Labels.....................................
3 - Setting Up Your Machine
3.1
3.2
3.3
3.4
3.5
Page 02
Page 03
Page 03
Page 04
Page 04
Loose Items Inventory..........................
Installing the Leveling Feet..................
Cutting Blade & Die Installation............
Adjusting the Side Guides....................
Adjusting the Blade Height...................
4 - Operation
4.1
4.2
4.3
Page 05
Page 05
Page 05
Corner Rounding Operation.................
Chip Removal.......................................
Tips on Cutting.....................................
5 - Maintenance
5.1
5.2
Page 05
Page 05
Safety....................................................
Annual Lubrication...............................
Thank you for your purchase of the CR-55
Cornerounder .
We ask that you take a moment to fill in the serial
number and other information on the front cover of the
manual. Please keep this manual as a reference for
future use.
For parts and service, please contact the Lassco-Wizer
Dealer from whom you purchased the machine. If you
require assistance in locating a Lassco-Wizer Dealer
please contact our customer service department at 585-
436-1934. Please have the model of your machine and
the serial number when you call.
If you wish to write to us, send correspondence to:
Lassco-Wizer
Attn: Customer Service
485 Hague Street
Rochester, NY 14606
6 - Parts Diagram
6.1
6.2
Page 06
Page 06
Parts Diagram.......................................
Parts List..............................................
2 - Safety
2.1 - Safety Instructions
All operators must read and understand the Users
Manual including all safety instructions before using this
equipment. Failure to fully understand the safety
instructions can result in personal injury. If after reading the
manual you are still uncertain about use, please
contact the dealer from whom you purchased the
machine for assistance. If you need contact information for
a Service Technician nearest you please call
585-436-1934.
SAFETY OF THIS EQUIPMENT IS THE RESPONSIBILITY
OF THE USER(S).
Please read and follow all warning labels on your machine.
Keep hands clear while operating machine.
THIS MACHINE IS DESIGNED FOR ONE PERSON OP-
ERATION. Never operate the machine with more than one-
person.
KEEP CHILDREN AWAY. All visitors should be kept a safe
distance from the work area.
USE RIGHT MACHINE. Don’t force tool or attachment to
do a job for which it was not designed.
MAINTAIN MACHINE WITH CARE. Keep tools sharp and
clean for best and safest performance. Follow instructions
for maintaining and changing accessories.
NEVER STAND ON MACHINE. Serious injury could occur
if the machine is tipped.
CHECK DAMAGED PARTS. Before further use of the ma-
chine, a part that is damaged should be carefully checked
to determine that it will operate properly and perform its in-
tended function--check for alignment of moving parts, bind-
ing of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or
other part that is damaged should be properly repaired or
replaced.
