26
LSI 090 - Rev. 00 - Ed. 04/2018
Take note!
The set number is not a count of the number of cups of coffee delivered by the appliance, it is just a control over the solenoid
valve insertion cycles for the groups (and therefore, for example, 100 solenoid valve cycles do not correspond to 100 delivered
cups of coffee).
Confirming the setting makes it possible to enter a minimum number of cycles which,
when reached, will cause the appliance to display an alarm on the control panel by
switching on the relevant control light (
b
). The display will read:
Fig. 16
Where the first “0” on the right is flashing. When the button
is pressed, this increases the number (0 -9), while pressing the button
, moves onto the most important digit on the left (the selected digit flashes to indicate that it can be changed).
Once the delivery cycle alarm value has been set, confirm the setting by pressing the button
.
Take note!
The number cannot be greater than or equal to the maximum number of solenoid valve cycles set previously.
