Lasonic MSU-2030i, User Manual

Page: 10 / 24

9
Pull the tab in first time use.
When the power of battery is exhaustible , please replace new
battery.
Install the battery : Insert the CR2025 type battery (3V) in the
battery compartment ( the polarity "
＋
" on top) then push the
battery compartment into the remote control.
Do not :
place near or expose to flame.
take apart or short circuit.
attempt to recharge alkaline or manganese battery.
use battery if the covering has been peeled off.
Mishandling of battery can cause electrolyte leakage which can damage items and may
cause a fire.
If electrolyte leaks from the battery , consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of your body.
Remove Battery if the remote control is not going to be used for a long period of time.
Store in a cool, dark place.
Replace Battery if the unit does not respond to the remote control even when held close to the
front panel.
Aim at the sensor, avoiding obstacles, at a maximum range
of 7 m (23 feet) 45° directly in front of the unit.
Keep the transmission window and the unit's sensor free
from dust.
Operation can be affected by strong light sources, such as
direct sunlight, and the glass doors on cabinets.
Do not :
put heavy objects on the remote control.
take the remote control apart.
spill liquids onto the remote control.
Installing the Battery of the remote control
Use of the remote control