lasmex S-02, User Manual

Page: 7 / 22

Start the loudspeaker box by toggling the power
The speaker automatically enters pairing mode and
should connect to the previously paired device. This
could take up to 10 seconds. If no device was paired
you will need to pair manually. If no device is paired
within 5 minutes the pairing mode will stop
automatically.
05
Pairing process
Start a search on the device you want to connect the
S-02 to. Of course the S-02 has to be turned on and
pairing mode must be active. You should find a Device
called “Lasmex S-02”. Select this device to establish the
connection. In Case you are asked for a password
please enter “0000” to complete the pairing. In Case
®
your Device supports NFC you can easily pair it to the
S-02 by holding it on the S-02 when in pairing mode. The
Pairing will then be completed automatically.
Pairing and connection
Power off state: After turning on the S-02 will connect to
the previously paired device if in range. If pairing fails