- 10 -
7. MAINTENANCE
Video door phone elements should be cleaned with a damp duster. Alternatively, use
preparations for plastic elements cleaning.
ATTENTION!
Do not use preparations including solvents or abrasive materials to clean the video
door phone elements, as their use may lead to permanent damage of the housing
surface! Avoid letting the video door phone elements contact with water or detergents
during cleaning as it may lead to the damage of video door phone.
8. TECHNICAL DATA
MVC-6501 monitor
Screen size
7
Dimension
240x175x35
Supply voltage
15V DC/0.8A
Operation temperature
0°C...70°C
BVC-6501 external panel
Dimension
135x55x40
Operation temperature
-20°C...70°C
ZS-15 feeder
Input voltage
230V AC
Output voltage
15V DC/ 800 mA max.
Dimension
87x87x60
Operation temperature
0°C...70°C
- It is possible to release the electro-catch at any time during the conversation by
pushing the button
on the screen. The electro-catch operates for up to ca. 5 s. Its
operation period does not depend on the length of button pushing.
The electro-catch
is activated once the button
is released.
- To close the conversation push (conversation) button.
- Should the voice communication after launching fail to activate, the monitor will be
automatically switched off after ca. 1 minute.
- The image from the camera may be activated on the screen at any time. In order to
do so push (conversation) button.
- It is possible to set volume, contrast and brightness on the MVC-6501 monitor (see
Figure 1)
Operating video door phone with additional monitor
-
Pushing the transfer conversation button during the voice communication will
transfer the conversation to the second monitor - the first monitor switches off, and
on the second monitor the doorbell sounds and the image from the camera is shown
(no audio mode).
-
In order to receive the transferred conversation push (conversation) button.
