Rev. A 12/17
2
W07350ES
Rev. A 12/17
7
W07350ES
MODELO W07350
FUNCIONAMIENTO
1. Cuidadosamente retire el Ventilador de la bolsa plástica y la
caja.
Asegúrese que el enchufe encaje firmemente en el
tomacorriente.
Cuando los enchufes quedan flojos en los
tomacorrientes, pueden deslizarse parcial o
completamente fuera del tomacorriente con un leve
movimiento del cable adosado. Los tomacorrientes
en este estado podrían sobrecalentarse y representar
un grave peligro de incendio; si está cubierto por una
cortina o tela, el riesgo de incendio es aún mayor.
2. Asegúrese que el interruptor de encendido se encuentre en la
posición de APAGADO.
3. Conecte a un tomacorriente de 120 voltios AC.
4. Deslice el interruptor de encendido hasta la velocidad deseada.
ALTA(2), BAJA(1)
ADVERTENCIA: ASEGÚRESE DE QUE EL VENTILADOR
ESTÉ APAGADO ANTES DE INVERTIR LA UNIDAD EN
LA VENTANA.
5. Cuando se invierte el ventilador en la ventana, éste sacará el
aire viciado en la habitación hacia el exterior.
INSTALACIÓN PARA VENTANA DE DOBLE
ABERTURA
(Figura 1)
Recomendamos mantener la malla de la ventana en su lugar.
1. Centre el ventilador en la ventana, tire de los paneles expansibles
hacia afuera para hacerlos encajar con seguridad en el riel de
la ventana.
2. Baje la ventana y asegure detrás del sujetador de la ventana
encima del ventilador.
PARA VENTANAS VERTICALES CORREDIZAS
y VENTANAS DE MARCO GIRATORIO:
Recomendamos mantener la malla de la ventana en su lugar.
1. Coloque el ventilador en la ventana con el interruptor apuntando
hacia el centro de la abertura.
2. El ventilador debe encajar con seguridad contra el borde interno
de la abertura de la ventana.
3. Deslice la ventana corrediza hasta tocar el borde del ventana. El
borde lateral de la ventana debe encajar con seguridad detrás
del borde de la caja del ventilador.
4. Para ventanas de tamaño superior a 35" (889 mm), construya un
panel de madera contrachapada que encaje en el área abierta
y asegure el ventilador al marco de la ventana.
5. En ventanas con marco giratorio que tengan un ancho superior
a 12" (304,8 mm), será necesario construir una estructura de
madera contrachapada alrededor del ventilador y luego asegurar
la estructura al ventilador y al marco de la ventana.
Figura 1
Panel Expansible
de Ventana
Figura 2
INSTALACIÓN DE LAS PATAS (Figura 2 )
Cuando utilice el ventilador como un ventilador de piso o
mesa, coloque las dos (2) patas en su lugar al deslizarlas en la
parte inferior hasta que queden sujetadas.
ADVERTENCIA: Asegúrese de que las patas no estén
colocadas cuando utilice el ventilador en una ventana.
Vista del inferior del ventilador
Patas
parte trasera
del ventilador
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
DO NOT
use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints,
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS
be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS
unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN
that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The
Blue Plug™
on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be
removed or tampered with. To reduce the risk of fire, electric shock and personal injury,
DO NOT
attempt to remove, replace,
repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device incor-
porated in this plug. Call 800-233-0268, Monday - Friday, between 8:00 a.m. and 5:00 p.m. Eastern for questions. If the plug
warning label is missing or damaged, call the toll free number for a replacement label.
THIS FAN HAS A POLARIZED PLUG
(one blade is wider than the other). This plug is designed to fit into the outlet only one
way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature.
If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
•
AVOID
the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
•
DO NOT
route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire
hazard.
•
ALWAYS
place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
•
NEVER
insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
•
DO NOT
block, cover or obstruct air flow to or from the fan while in operation.
•
DO NOT
use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location
may create a shock hazard.
•
DO NOT
run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture
or appliances. Arrange cord away from traffic area and where it will not be tripped over.
•
NEVER
use a single extension cord to operate more than one Fan or other electrical device.
•
DO NOT
use this Fan if it has been damaged or is not functioning properly.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008)
.This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008)
.This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
WARNING
CAUTION
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED
CONTROL DEVICES.
