Rev. B 12/17
2
U35120ES
Rev. B 12/17
7
U35120ES
MODELO U35120
FUNCIONAMIENTO
Este Ventilador puede hacerse funcionar mediante
los controles manuales ubicados en la parte superior
de la unidad (como se muestra en la
Figura 3
) o con el
Control Remoto (se indica en la
Figura 4
).
1. Cuidadosamente retire el Ventilador de la bolsa
plástica y la caja.
2. Coloque el ventilador sobre una superficie firme
y nivelada.
ADVERTENCIA:
Los tacos de plástico o hule, tales
como las patas de esta unidad, pueden pegarse a la
superficie de los muebles. La unidad podría dejar un
residuo capaz de oscurecer, manchar o dejar marcas
permanentes en el acabado de ciertas superficies de
muebles, incluyendo superficies y pisos de madera.
3. Conecte el cable eléctrico a un tomacorriente de
120 voltios.
4. Encienda el Ventilador oprimiendo el
Botón de Encendido
( ) en la unidad o en el control remoto. La primera vez
que la unidad sea encendida, se encontrará en la posición
de alta velocidad.
5.
VELOCIDADES:
Ajuste la velocidad del ventilador
oprimiendo el
Botón de Velocidad
( ) después de haber
encendido la unidad. Cada vez que se oprima el botón
de velocidad, cambiará la velocidad, de Alta (3) a Media
(2) a Baja (1).
6.
OSCILACIÓN:
Con el Ventilador encendido, oprima el
Botón de Oscilación
( ) para activar y desactivar la función
de oscilación. La función de oscilación puede utilizarse
con cualquier modo de velocidad y/o de temporizador.
7.
FUNCIÓN DE TEMPORIZADOR:
Este ventilador está
equipado con un temporizador. El temporizador puede
ser programado 1 hora a 7 horas. Continúe oprimiendo
el Botón Temporizador ( ) para lograr el tiempo de
programación deseado. Para cancelar el temporizador,
presione el botón del temporizador hasta que se
apague la luz.
8. Para APAGAR el Ventilador, oprima el
Botón de
Encendido/Apagado
( ) y desenchufe la unidad del
tomacorriente.
Debido a la alta velocidad del aire generado por este Ventilador, es normal escuchar el
sonido del aire. Para obtener un funcionamiento más silencioso, utilice baja velocidad.
Figura 3
Botón De
Encendido
Botón De
Ventilador
Botón De
Oscilación
Botón De
Temporizador
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
DO NOT
use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints,
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS
be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS
unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN
that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The
Blue Plug™
on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be
removed or tampered with. To reduce the risk of fire, electric shock and personal injury,
DO NOT
attempt to remove, replace,
repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device
incorporated in this plug.
THIS FAN HAS A POLARIZED PLUG
(one blade is wider than the other). This plug is designed to fit into the outlet only one
way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety fea-
ture. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
•
AVOID
the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
•
DO NOT
route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire
hazard.
•
ALWAYS
place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
•
NEVER
insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
•
DO NOT
block, cover or obstruct air flow to or from the fan while in operation.
•
DO NOT
use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location
may create a shock hazard.
•
DO NOT
run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture
or appliances. Arrange cord away from traffic area and where it will not be tripped over.
•
NEVER
use a single extension cord to operate more than one Fan or other electrical device.
•
DO NOT
use this Fan if it has been damaged or is not functioning properly.
•Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Fan. If this occurs,
move the Fan to another location.
•Keep Fan remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Fan.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008)
.This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008)
.This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the
user’s authority to operate this equipment.
CAUTION
ARMADO
1. Para un armado más sencillo, deposite el Ventilador
hacia abajo para que la parrilla frontal y el panel de
control apunten hacia arriba.
2. Arme las Mitades de la Base de Apoyo encastrando
Base de Apoyo A
con
Base de Apoyo B
.
(Figura 1)
3. Alinee la
Montura de la Base de Apoyo
con la
Base
del Motor
. Adose la
Montura de la Base de Apoyo
a la
Base del Motor
con
(4) Tornillos Mariposa.
Base de
Apoyo A
Figura 1
Figura 2
Tornillos Mariposa
Base de
Apoyo B
Cable Eléctrico
