background image

NEW 7/21

2

T42710ES

SAVE THESE INSTRUCTIONS

Read all instructions before using this Fan.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, these instructions and warnings should always be 

followed to reduce the risk of fire, electrical shock and injury to persons:

CAUTION

• 

AVOID

 the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these devices may overheat 

and cause a fire hazard.

• 

DO NOT

 route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire hazard. 

• 

ALWAYS

 place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning. 

• 

NEVER

 insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.

• 

DO NOT

 block, cover or obstruct air flow to or from the Fan while in operation.

• 

DO NOT

 use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location may create a shock hazard.

• 

DO NOT 

run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. 

Arrange cord away from traffic area and where it will not be tripped over.

• 

NEVER

 use a single extension cord to operate more than one Fan or other electrical device.

• 

DO NOT

 use this Fan if it has been damaged or is not functioning properly.

• Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Fan. If this occurs, move the Fan to 

another location.

•  Keep Fan remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Fan.
• 

THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008)

. This Fan is not suitable for use in agricultural facilities including 

areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or 
local codes or standards relating to electrical requirements for agricultural buildings. 

• 

THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008)

. This Fan is not suitable for use in hazardous locations. Please refer 

to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for hazardous locations.

WARNING

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS 
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS: 

DO NOT 

use this Fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints, gasoline, varnishes, 

floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the containers for these products!

ALWAYS

 be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the outlet and create 

a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this condition should be replaced by a 
qualified electrician.

ALWAYS

 unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole means of disconnecting 

power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and unplug the Fan when not in use.

BE CERTAIN

 that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.

The 

Blue Plug

on your Lasko Fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be removed or tampered 

with. To reduce the risk of fire, electric shock and personal injury, 

DO NOT

 attempt to remove, replace, repair or tamper with the originally sup-

plied plug. If the Fan has stopped functioning, it may be due to the safety device incorporated in this plug. 

THIS FAN HAS A POLARIZED PLUG 

(one blade is wider than the other). This plug is designed to fit into the outlet only one way. Match the wide 

blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature. If the plug does not fit in the outlet, con-
sult a qualified electrician. The outlet may need to be replaced.

NEW 7/21

7

T42710ES

1 Cuerpo

3  Base de Soporte A

4  Base de Soporte B

2   Control Remoto

Controles

Partes Incluidas

1

4

3

Ensamblaje

2. Alinee la 

Montura de la Base de 

Apoyo

 con la 

Cuerpo.

1.  Empuje a los jefes en la 

Base de 

Soporte B

 en las ranuras del jefe 

en la 

Base de Soporte A.

3. Sostenga la 

Cuerpo

 en su lugar mientras gira 

la 

Montura de la Base de Apoyo

 en el sentido 

de las agujas del reloj hasta que deje de girar 
y encaje en su lugar.

Botón de Oscilación

Presione el Botón de Oscilación para iniciar

y detener la función de oscilación.

Botón de Encendido

ENCENDIDO/APAGADO el Ventilador 

presionando el Botón de Encendido.

Botón de Temporizador

El temporizador se puede configurar para 8 horas. Con-

tinúe pulsando el Botón del Temporizador para llegar a la 

configuración de tiempo deseada.

Botón de Noche

Las luces del ventilador se atenuarán al 50%. El ventilador 
funcionará a la velocidad 12 (la más alta) durante una hora, 
cambiará a la velocidad 10 durante una hora, cambiará a 
la velocidad 8 durante una hora, cambiará a la velocidad 6 
durante una hora y, finalmente, cambiará a la velocidad 4 
hasta que el usuario interactúe con el ventilador.

Botón de Ajuste de la Velocidad del Ventilador 

(+)

Presione o mantenga presionado para aumentar a la velocidad 
del ventilador deseada.

Botón de Ajuste de la Velocidad del Ventilador 

(-)

Presione o mantenga presionado para disminuir a la velocidad 
del ventilador deseada.

2

Summary of Contents for T42710

Page 1: ...es a viernes de 8 a m a 5 p m hora del Este Por favor tenga disponible el número de modelo Customer Service Dept 820 Lincoln Ave West Chester PA 19380 Por favor no envíe el producto a esta dirección www lasko com El manual imprimió en la China MANTENIMIENTO Parareducirelriesgodechoqueeléctricoeincendio porfavorobedezcalassiguientesinstrucciones Siempre desconecte el cable eléctrico antes de trasla...

Page 2: ... solvents ALWAYS read and follow all warnings and instructions on the containers for these products ALWAYS be sure the plug fits tightly into the outlet When plugs fit loosely into outlets they may slip partially out of the outlet and create a poor connection This may cause outlets to overheat and create a potential fire hazard Outlets in this condition should be replaced by a qualified electricia...

Page 3: ...res inflamables incluidos pinturas gasolina barnices disolventes o productos de acabado para pisos SIEMPRE lea y siga todas las advertencias e instrucciones descritas en los envases de estos productos SIEMPRE asegúrese de que el enchufe encaje bien en el tomacorriente Cuando los enchufes no encajan bien en el tomacorriente pueden de slizarse un poco y crear una mala conexión Esto puede causar que ...

Page 4: ...RS AND IN NO EVENT SHALL LASKO S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE I INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER OR II REPLACEMENT OR REPAIR OF ANY HOUSE FUSES CIRCUIT BREAKERS OR RECEPTACLES NOTWITHSTANDING ANYTHING TO THE CONTRARY IN NO EVENT SHALL LASKO S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH...

Reviews: