2
7
Rev. D 2/11
2084161
Rev. D 2/11
2084161
MODEL 5132
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
SAVE THESE INSTRUCTIONS
Read all instructions before using this Fan.
1. Make certain the power source conforms to the electrical requirements of the Fan.
2. Make certain that the room is equipped with a working smoke detector.
3. Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock,
or injury to persons.
4. To reduce the risk of personal injury and electric shock, the Fan should not be played with or placed where small children can reach it.
5. Unplug power cord before installing, servicing, or moving the Fan.
DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING
OR MOVING THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE
LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUGGED IN.
6. This Fan must
NOT
be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres
where gasoline, paint or flammable liquids are used or stored.
7.
DO NOT
use Fan in or near a window. Rain may create an electrical hazard.
8. Completely assemble Fan, according to instructions, before connecting to power supply.
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN
WITH ANY SOLID STATE SPEED CONTROL DEVICES.
9. Where possible, avoid the use of extension cords because the extension cord may overheat and cause a fire. If you must use an exten-
sion cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL listed.
NEVER
use a single
extension cord to operate more than one Fan. Do not plug Fan into any other cord connected device, such as a power strip, cord
reel, surge protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices may create a fire hazard.
10.
NEVER
operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner.
There are no user serviceable parts. Return Fan to an authorized service facility for examination, electrical or mechanical adjustment
or repair.
11.
NEVER
insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire,
or damage the Fan. To reduce the risk of fire,
DO NOT
block or tamper with the Fan in any manner while it is in operation.
12. Always place the Fan on a stable, flat, level surface when operating to avoid the chance of the Fan overturning. Locate the Power
Cord so the Fan or other objects are not resting on it. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be
tripped over.
13. This Fan is not intended for use in wet or damp locations.
NEVER
locate a Fan where it may fall into a bathtub or other water con-
tainer.
NEVER
use Fan where flammable liquids are used or stored.
14.
NEVER
use Fan outdoors.
15. This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please
refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical require-
ments for Agricultural Buildings.
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).
16. This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or
local codes or standards relating to electrical requirements for Hazardous locations.
THIS FAN DOES NOT MEET THE REQUIRE-
MENTS OF NEC ARTICLES 500 (2008).
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way. Match wide blade of plug to wide slot. Fully
insert. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. DO NOT attempt to defeat this safety feature.
This plug is a safety feature, to reduce the risk of fire, electric shock and personal injury. DO NOT remove,
replace, repair or tamper with the originally supplied plug. If the Fan does not function properly, it may be due
to the safety device incorporated in this plug. Return to an authorized service center or call 800-233-0268,
Monday - Friday, between 8:00 a.m. and 5:00 p.m. EST. If the plug warning label is missing or damaged, call
the toll free number for a replacement label.
CONJUNTO DE
CABEZA DE
VENTILADOR
ARMADO
PARA ARMAR
(Figura A)
:
Verifique que ha recibido todas las siguientes piezas:
A.
Conjunto de cabeza del ventilador
B.
Conjunto de pinza
1.
Inserte el CONJUNTO DE CABEZA DEL VENTILADOR en la ranura
de la PINZA hasta que esté completamente seguro.
PARA MONTAJE EN LA PARED
(Figura B)
:
2.
Instale un Tornillo para madera (#8 x 3/4" o uno equivalente,
no incluido) en la pared y cuelgue la Pinza en el Tornillo, como
se muestra.
FUNCIONAMIENTO
1.
Enchufe el cordón en un tomacorriente de 120V CA, 60 HZ.
2.
Sujete el Ventilador a una estructura plana de 1/4” a 1-3/4” de
grueso o a un poste de 1/2” a 1-3/4” de diámetro. El sujetar
el ventilador a estructuras de mayor o menor grosor puede
quedar inestable.
3.
PARA CONTROLAR LA VELOCIDAD DEL VENTILADOR:
Gire la
Perilla ubicada en la parte trasera de la Cubierta del Motor. Gírela
en sentido horario (hacia la derecha) para velocidades “HIGH y
LOW” (rápida y lenta) y en sentido contrario (hacia la izquierda)
para la posición “OFF” (apagado).
4.
PARA AJUSTAR LA INCLINACIÓN DE LA CABEZA:
Suelte la
perilla que se encuentra debajo de la Cabeza del Ventilador.
Incline la cabeza para obtener la posición de flujo de aíre que
desea.
Vuelva a apretar la Perilla.
Figura A
Figura B
CONJUNTO
DE PINZA
A
A.
B.
