background image

Manual: RS 800 G US, RS 800 RGY US, RS 1000 RGB US, RS 2300 RGB US RS-2700 RGB US 

5 / 9 

Revision  Jun-13 

Rotation 

192~255 

Rotate h. & v. 

Dot rotation 

0~63 

No function 

64~127 

Rotating 

192~255 

Rotating & Dotting 

Move 

0~63 

No function 

64~127 

Move horizontally 

128~191 

Move vertically 

192~255 

Move h. & v. 

Extend 

0~63 

No function 

64~127 

Extend horizontally 

128~191 

Extend vertically 

192~255 

Extend h. & v. 

10 

Zoom 

0~85 

No function 

86~169 

Small to large 

170~255 

Large to small 

11 

Drawing speed 

0~255 

slow to fast 

12 

Scan speed 

0~255 

slow to fast 

13 

Colour speed 

0~255 

slow to fast 

14 

Size 

Original size 

1~255 

Small to large (120 = original) 

Maintenace / cleaning 

Always disconnect from mains before cleaning/opening the laser. You can open the device by 

removing the top: remove the mounting bracket (4 quick locks), the 5 Philips screws, and the eye 
bolt. 
Regularly clean the interior from dust, especially ensure operation of the fans. To clean the mirrors, 

ideally use acetone and lens cleaning paper (fold paper to get an edge with which to clean the 
mirrors). If not available, you can also use window cleaner, and a paper towel. Be careful, even light 

scratches reduce the output power of the laser; always clean with strokes in one direction, to 
minimize the effect of scratches. Mirrors need cleaning, when a “halo” is noticeable around the beam, 
or an unusual high amount of diffuse light can be seen inside the device. When fog fluid condenses in 

the device, clean all traces, and rearrange the position of fazer and/or laser. 

Technical specifications 

 

Output power (at the laser):

 

RS 800 G: min. 550mW, max. 800mW,   >550mW, 532nm green 
RS 800 RGY: min. 600mW, max 800mW,  >250mW 532nm green, >350mW 655nm red 

RS 1000 RGB: min. 750mW, max 1000mW, >200mW 532nm green, > 300mW 655nm 
red, >250mW 445nm blue 
RS 2300 RGB: min. 1550mW, max 2300mW, >250mW 532nm green, > 300mW 640nm 

red, >1000mW 445nm blue 
RS 2700 RGB: min. 1800mW, max 2700mW, >500mW 532nm green, > 300mW 640nm 

red, >1000mW 445nm blue 

 

Lasersources:

 air-cooled DPSS laser (green), laser diode (blue with RGB, red with RGB and 

RGY models) 

 

Laser class: 

 

Modes:

 ILDA, DMX 512, auto, music active 

 

ILDA:

 25pin ILDA standard Sub-D shaped 25pin connector 

 

Galvos:

 50k scanspeed 

 

DMX 512:

 14 channels 

 

Patterns:

 160  

 

Scanangle:

 set to ca. 40° optical (60° max) 

 

Beam:

 ca. 3mm/1mrad, blue with RS-2300 RGB 4x1mm, 3mrad 

 

Accessories:

 power cable, key switch, interlock plug, manual, safety cord 

 

The laser comes in a flightcase. 

 

Input voltage:

 AC 110~120V or 220~240V switchable 50/60Hz 

 

Power consumption:

 120W 

 

dimensions:

 21.6”x12.6”x12.2” (55 x 32 x 31cm) (W x D x H) 

 

Weight:

 33lbs (15kg) Laser, 

total:

 62lbs (28kg) 

(with flight case)

 

 

Operating temperature:

 

50~95°F (

10°-35°C) 

 

Loudness:

 <70dB 

Summary of Contents for RS 1000 RGB US










Reviews: