Manual: Laserworld Proline Series
page 8 / 36
8. Operation
1. Connect the power cable to the device and then to the mains
2. Insert key and turn it „on“
3. Press the „on/off“ switch on. The „on/off“ switch shines green now.
Attention! The pro-
jector may emit laser beams immediately.
4. Mode selection:
Please use the push buttons below the LCD display to select the different modes
Auto mode:
Push the Menu button until
MODE: AUTO
is displayed. Press the ‚UP‘ and/or ‚DOWN‘
buttons to browse the mode and press ‚ENTER‘ to select the desired program.
Music mode:
Push the Menu button until
MODE: MUSIC
is displayed. Press the ‚UP‘ and/or ‚DOWN‘
buttons to browse the mode and press ‚ENTER‘ to select the desired program.
Control the sensitivity of the microphone by pushing the Menu button until
MODE:
SETTING
is displayed. Press the ‚UP‘ until
MODE: SETTING - MUSIC
is displayed
and the ‚UP‘ and/or ‚DOWN‘ buttons to set the sensitivity of the microphone. Press
‚ENTER‘.
DMX mode:
Push the Menu button until
MODE: DMX
is displayed. Press the ‚UP‘ and/or ‚DOWN‘
buttons to set the DMX address and press ‚ENTER‘.
Connect a DMX controller to operate the laser.
The laser uses 16 DMX channels, so make sure that the next device uses an address that
doesn’t overlap with this range.
Menu
Browse the Menu
Enter
LCD Display
