Laserworld MH-OEM, User Manual

Page: 8 / 12

USER MANUAL: Laserworld Moving Head MH-OEM
Date: 09/2010
Page 8 of 12
6. MAINTENANCE
Always disconnect from mains before cleaning/opening the laser. Remove the cover of the
moving head, and the top covers of the base to perform cleaning.
Regularly clean the interior from dust, especially ensure operation of the fans. To clean the
mirrors, ideally use acetone and lens cleaning paper (fold paper to get an edge with which to
clean the mirrors). If not available, you can also use window cleaner, and a paper towel. Be
careful, even light scratches reduce the output power of the laser; always clean with strokes
in one direction, to minimize the effect of scratches. Mirrors need cleaning, when a “halo” is
noticeable around the beam, or an unusual high amount of diffuse light can be seen inside
the device.
When fog fluid condenses in the device, clean all traces, and rearrange the position of hazer
and/or laser.
Never look directly into the light source.
Always disconnect from the mains when the device is not in use or before
cleaning it.
7. TECHNICAL SPECIFICATIONS
LW50k scanner system, deflection angle: max. 60° op tical
▪
scanspeed: max. 50.000pps
▪
ILDA: 25pin ILDA Standard Sub-D shaped 25pin connector
▪
Control mode: ILDA, DMX 512, sound & automatic mode
▪
DMX 512: 20 channels; basic patterns: 160
▪
Movement: Pan: 530° Tilt: 280° 16bit resolution
▪
Display: digital display at the back
▪
Accessories: power cable, mountings, manual.
▪
Delivery in flightcase.
▪
Power supply: 220~240V AC 50/60 Hz
▪
Power consumption: 200W
▪
Size: 539 x 492 x 843 mm (L x W x H);
▪
weight: 60 kg; incl. Flightcase: 91 kg
PLEASE NOTE
This device has left our premises in absolutely perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and unskilled
operation!
For service please contact your dealer, or see http://en.laserworld.com/en/reclamation-
service.html
For service contact your dealer, or Laserworld. Use only Laserworld spare parts.
Subject to change without notice. Errors and omissions expected.