Laserworld HIGH PRO-OEM, User Manual

Page: 8 / 12

USER MANUAL: Laserworld Moving Head HIGH PRO-OEM
Date: 09/2010
Page 8 of 12
6. MAINTENANCE
Always disconnect from mains before cleaning/opening the laser. Remove the cover of the
moving head, and the top covers of the base to perform cleaning.
Regularly clean the interior from dust, especially ensure operation of the fans. To clean the
mirrors, ideally use acetone and lens cleaning paper (fold paper to get an edge with which to
clean the mirrors). If not available, you can also use window cleaner, and a paper towel. Be
careful, even light scratches reduce the output power of the laser; always clean with strokes
in one direction, to minimize the effect of scratches. Mirrors need cleaning, when a “halo” is
noticeable around the beam, or an unusual high amount of diffuse light can be seen inside
the device.
When fog fluid condenses in the device, clean all traces, and rearrange the position of hazer
and/or laser.
Never look directly into the light source.
Always disconnect from the mains when the device is not in use or before
cleaning it.
7. TECHNICAL SPECIFICATIONS
Power supply: AC 220V-240V, 50/60 Hz
DMX 512: 24 channels
Condition temperature: 10°C ~ +35°C
Input signal bandwidth: 0~1000Hz
X/Y axes beam scanning optical angle: 0 ~ ±30° (max)
Power consumption: 200W
Working mode: ILDA, DMX512, automatic mode (sound, stand-alone programmes)
Weight: 60 kg, 91 kg incl. flightcase
Dimensions: 535 x 510 x 845 mm (L x W x H)
Loudness: <70dB
Errors and omissions expected.
PLEASE NOTE
This device has left our premises in absolutely perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and unskilled
operation!
For service please contact your dealer, or see
http://en.laserworld.com/en/reclamation-
service.html . Only use Laserworld spare parts.