Manual: Evolution Series ES-800S RGB 3D
page 7 / 18
8. Operation
1. Connect the power cable to the device and then to the mains
2. Use the supplied key to turn on the key switch
3. Press „ON“ to switch on your device
4. Your device runs in
auto mode
:
5. Your device runs in
music mode
:
Control the music-sensitivity by the trim pot at the front side of the device. The LED is
flashing when the device is triggered.
6. Your device runs in
DMX mode
if ‘10‘ is switched off:
connection for
power supply
DMX address
DMX in
DMX out
LED signal
Key switch
fan
power switch
