background image

USER MANUAL: Laserworld Ecoline EL-250RGY 

Date: 01/2008 

Page 7 of 8 

 

6. MAINTENANCE 

 

Maintenance should be perfomed ervery 15-day period, by using a sponge wich is 
dipped with alcohol, rather than wet cloth or other chemical liquid, to clean the 
mirror. 

Always disconnect from the mains when the device is not in use or before cleaning it. 
 
There are no serviceable parts inside the device. Maintenance and service operations 
are only to be carried out by authorized dealers. 
 

Never look directly into the light source. 

 

Always disconnect from the mains when the device is not in use or before 
cleaning it. 

 

 

7. TECHNICAL SPECIFICATIONS 

 

Power supply:

 AC 220V-240V, 50/60 Hz 

DMX 512: 

 10 channels 

Ambient temperature:

 -10°C – +35°C 

Power consumption:

 40 W 

Working mode:

 automatic, music active, DMX512 

Optical power:

  

green: ca. 75mW / 532nm 

red: ca. 175mW / 650nm 

Laser classification:

 3b 

Weight:

 3.8 kg 

Dimensions:

 265 x 125 x 192 mm 

 
 
PLEASE NOTE 
 

This device has left our premises in absolutely perfect condition. In order to maintain 
this condition and to ensure a safe operation, it is absolutely necessary for the user 
to follow the safety instructions and warning notes written in this user manual. 

Laserworld cannot be made liable for damages caused by incorrect installations and 
unskilled operation! 

 

Summary of Contents for EL-250RGY









Reviews: