USER MANUAL: Laserworld Ecoline EL-D100G
Date 01/2008
page
5
of
8
3. AUTO- MUSIC-MODE
When no DMX signal is connected (stand-alone mode) you can select auto mode
(patterns will be displayed one after the other), by setting switch 10 to “ON” before
turning the device on.
If you put switch 10 to “OFF” the patterns will change triggered by sound (sound or
music mode). You can control the music-sensitivity of the microphone with the min-
max knob on the rear panel.
When DMX is connected you can also select these two modes alternatively to DMX
controlled operation (see chapter 5).
4. OPERATION WITH DMX
Set the DMX address code with the binary system “0” or “1” .
Examples:
DMX-
adress
DMX-
adress
1
65
17
113
33
161
The device has 4 operate channels, so if you set the first on DMX address “1”
The second should be DMX address “5” and so on.
