-
Always ensure sufficient ventila-
tion.
-
Do not face spotlights (especially
moving heads) to the device.
-
Check temperature after approx.
30 minutes with each new ins-
tallation. If necessary install the
projector at a place with different
temperature.
-
Switch off device when it is not
needed. Diodes are switched on
and can wear out even if there is
no visible laser output.
-
Keep the device dry. Protect it
from moisture, rain and damp.
•
The devices of Ecoline, Evolution,
Club and Proline Series are not
meant for professional applica-
tions. After approx. one hour of
operation, the device should cool
down for about 15 minutes.
•
Please ensure the fans and
heatsinks are clear from dust and
debris otherwise the risk of over-
heating may occur. If the unit and
airways appear to be blocked then
please contact a qualified service
engineer to maintain and service
the product.
•
Removal of the warranty label
as well as damages to the device
caused by improper handling,
neglect of the safety instruc-
tions and service notes will void
the warranty.
6. Warnings and other notices on the device
Laser radiation!
Avoid exposure
to beam
Caution of ra-
diation if cover
is removed
Power supply
& consumption
Model type
Wavelength
Output power
Production year
Use in enclosed spaces only!
Laser class 3B
Summary of Contents for Ecoline EL-900RGB
Page 28: ......
