7
USING YOUR DETECTOR
POWER SUPPLY
SET UP
OPERATION
▪
The instrument is supplied with one 9v alkaline battery as its
standard power source.
Removing & inserting the alkaline battery
▪
Remove the battery cover door and the battery.
▪
Insert the battery according to polarity and replace the battery door.
Powering on
▪
Switch the detector on by pressing the power button. The LCD
screen will turn on and the speaker will emit a small tone to indicate
the instrument is operating.
▪
The LCD screen will display the battery level, detection mode,
measurement type and speaker function.
Changing detection mode
▪
The detection mode can be changed between broad, coarse and
fine mode. Press the detection mode button to cycle through the
detection modes.
Changing measurement units
▪
The measurement unit can be changed between feet, inches
and millimetres. Press the mode button to cycle through the
measurement units.
Mounting the staff clamp
▪
Insert the staff clamp screw into the staff clamp thread.
▪
Rotate the nut until the clamp is secured in place.
