Lasertec HV1R, Instruction Manual

Page: 9 / 16

9
Using Your Detector
‣ Switch the detector on by pressing the power button. The speaker will beep
once indicating the unit is operating.
‣ To change between coarse and fine mode press the coarse / fine mode button.
‣ Move the detector into the path of the laser beam.
‣ Hold the detector upright for horizontal beams. Rotate the detector 90°
for vertical beams.
‣ The LED lights will indicate the position of the beam alongside the up and down arrows.
The detector will emit a constant beep once the level position has been located.