10
▪
Press the pulse mode button on the top of
the instrument to enter into pulse mode.
▪
Switch the detector on by pressing the power
button. The speaker will beep indicating the
instrument is operating.
▪
Move the detector into the path of the laser
beam.
▪
Press the detection mode button to alternate
between fine and course detection.
▪
Hold the detector upright for horizontal
beams. Rotate the detector 90° for vertical
beams.
▪
The LED direction indicators will indicate the
position of the laser beam. The centre LED will
indicate alignment with the beam.
USING A DETECTOR
The detector is an optional accessory
which can be purchased from your retailer.
i
Detector position for horizontal beams
Detector position for vertical beams
