LaserPoint Fit Instruction Manual Download Page 8

Technical Specifications 

(*)

:  

(*)

 Specifications subject to change without notice.

 

 

(1)  Individually compared against a NIST or PTB reference. 

 

Warranty

 

All Laser Point instruments are warranted against defect in material and workmanship 
for one year after invoice date. During the warranty period Laser Point will repair, or at 
his sole option, replace at no charge components that prove to be defective, provided 
the parts are returned, shipping prepaid, to Laser Point Customer Service. 
This warranty does not apply if the instrument or any accessory has been damaged  by 
accident or misuse, or as a result of service or modification by other body than  Laser 
Point. No warranty is given by Laser Point on coatings and battery pack. 
 

 

 

 

 

 

 

F

F

i

i

t

t

 

 

 

   Instruction Manual 

  (Rev11- Nov 2008; 

Firm. vers.11

 

 

Laserpoint srl - Via Burona, 51 - 20090 Vimodrone (Milano) - Italy 

Phone +39 02 27 40 02 36 - T39 02 25 02 91 61 

www.laserpoint.it

 

 

  

Parameter 

 Fit 50  Fit 200  Fit 500 

Maximum Measurable Power (W) 

50 200 500 

Minimum Measurable Power @ ±3% Accuracy (W)        1.5

 (1)

 

5

 (1)

 15

 (1)

 

Absolute Minimum Measurable Power (W) 

1.25 3  7.5 

Maximum Laser Beam Diameter (mm) 

20 20  25 

Power density damage threshold @ full scale at YAG

 

wavelength (W/cm

10000 

Power density damage threshold @ full scale at CO

wavelength (W/cm

2500 

Repeatability 

±1% 

ADC Resolution (W) 

±0.06 ±0.25  ±0.60 

Display Resolution (W) 

0.01 0.1  0.1 

Measurement Accuracy  

±3% 

Maximum allowable sensor head temperature (°C) 

70 

Time to measure and display data  (s) 

Power consumption in On status (mW) 

26 

Power consumption in Off status (

µ

W) 

25 

Power supply (2x AA Batteries) (V) 

Continuous operation without battery replacement (h)  

200 

Operating temperature range (°C) 

+10 to +40 

Storage temperature range (°C) 

-10 to +60 

Weight (body) (g) 

 

336 

Weight (sensor with cable) (g) 

178 200  280 

Size (head) DxH (mm) 

56x20 56x25  66x30 

Size (body) LxWxH (mm) 

95x71x46 

 
 
WARNING! The user of this instrument must be trained to the
use of power lasers and associated risks. LaserPoint is in no way
liable for any damage resulting from improper, careless or above
rated limits use of this instrument. 

                                                                                                                                    

 

Summary of Contents for Fit









Reviews: