LaserLiner SuperSquare-Laser, Quick Start Manual

Page: 7 / 68

SuperSquare-Laser
07
4
Technische Änderungen vorbehalten
02/2014
3
GB
Wall applications
The long-range laser beams also project very visible laser
lines on walls. Level the instrument with its levelling feet (5,6)
according to the spirit-level indicators (2). The spirit-levels
are back-lighted to guarantee good visibility even in reduced
ambient light.
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
Fix a plumb bob with a line at least 2.5 m in length on the
wall, making sure that the bob can swing freely. Align the
spirit levels, turn on the unit, adjust the lines to the plumb
and the spirit-levels (2) with the levelling feet (5,6). The
precision is within tolerance if the deviation between the
laser line and plumb line is not greater than 0.5 mm / 1 m.
Checking the vertical line
Technical Data
Angle accuracy of the laser lines ± 0.05°
Precision of the vertical laser lines ± 0.5 mm / 1 m
Operating range (depending on room
illumination)
20 m
Power supply 2 x 1,5V AA / 24 h
laser wavelength 635 nm
Laser class 2 / < 1 mW
Weight 0,4 kg
Operating temperature 0 °C ... + 50 °C
Storage temperature -10 °C ... + 70 °C
Subject to technical changes
02/2014
Regularly check the calibration before use, after
transport and after extended periods of storage.
!