20
4
Slope mode
Switch the line laser into inclination mode using a long press on button 5
(inclination function on/off) and select the laser using the selection button.
Sloping planes can now be measured. This mode cannot be used to perform
horizontal or vertical levelling as the laser lines are no longer aligned automatically.
This is indicated by the laser line flashing. The LED lights (7) constantly red.
The laser lines flash when the device is outside the automatic levelling
range of 3°. Position the device such that it is within the levelling
range.
!
LASER
LASER
LASER
LASER
LASER
LASER
LASER
LASER
3
Horizontal and vertical levelling
Switch the laser device on. The automatic sensor is now active and will level
the laser device automatically. As soon as device-levelling is completed and
the slope function LED (7) lights up continuously, horizontal or vertical object
levelling can be carried out. Maximum accuracy is attained when device-levelling
is completed. The laser lines can be switched individually with the selection
button.
EN
Summary of Contents for PrecisionPlane-Laser 4G Pro
Page 62: ...62 ...
