LaserLiner DistanceMaster Home, Manual

Page: 16 / 172

GB
16
90°
1x
1x
Important notices
• The laser points to the location that will be measured.
No objects may get into the laser‘s line of measurement.
• The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
• The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the
maximum deviation may be greater than 3 mm.
• Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
• Measurements made through glass (window panes) can falsify
measurement results.
• An energy-saving function switches the device off automatically.
• Clean with a soft cloth. Water may not be allowed to penetrate the
housing.
3. Now move the laser
forward and back.
reference
4. Rapid beeping: Measured value within reference value of ±1 mm.
Slow beeping: Reference value not yet reached.
stop
Reference measurement:
Reference length
Set reference length
1a. Selection of
1b. Number 2. Define reference
tens position set-up value