10
AutoCross Laser ACL 2
ENGLISH
Inserting the batteries
Open the battery compartment (1) and insert the
batteries in accordance with the installation symbols,
ensuring the correct polarity. Close the cover.
Switch on
Switch the unit on. A cross line will be projected.
RX-Ready
This unit can be equipped with an optional Laser
receiver. With the laser receiver the laser lines can be
seen under all light conditions until a max. range of
50 m.
Note:
If the device is positioned too much out of level
(more than 3° or 6°), the laser will blink and an
acoustic warning signal will sound. Position the device
on a more level surface.
Note:
Regularly check the calibration before use, after
transport and after extended periods of storage.
Technical Data
Automatic levelling side-side
range
forward-backward
+ 3°
+ 6°
Accuracy
+ 3 mm / 10 m
Operating range (depending on
room illumination)
20 m
Power supply
3 x 1,5V AA /
ca. 48 h
laser wavelength
635 nm
Laser class
2M / < 5mW
Weight
0,5 kg
Operating temperature
0°C to +50°C
Storage temperature
-10°C to
+ 70°C
Optional:
Working range Laserreceiver
max. 50 m
Subject to technical changes without
notice
11/2006
