20
7
8
3 sec.
EN
Adjust vertical slope, to a max. of 2° (X, Y axis)
Adjusting both axes
X axis: The slope function LED (18) flashes rapidly.
Y axis: The slope function LED (18) flashes slow ly.
3 sec.
1 sec.
Slope function > 2°
Steeper slopes can be set using the angle plate, w hich is available as an
optional extra (product ref. 080.75). To this end you need to use a crank
tripod, such as the 300 cm crank tripod P 300 cm, product ref. 080.39.
Refer to the illustrations below.
TIP: Set the angle plate to the zero position and allow the device to align
itself automatically. Then sw itch off the automatic sensor w ith button 14
(slope function ON). Finally, incline the device to the angle you require.
Slope adjustment > 2°
3 sec.
