4
MAINTENANCE
The only maintenance that may be required is:
1. Periodically clean the Exit Window of the GL3000PMC.
Do this with a soft cloth. Do not use Kleenex or paper
towels. Be careful not to scratch the glass.
2. Periodically blow the pneumatic lines to clear
moisture from the system.
Note: Always turn off power to the laser when cleaning
the Exit Window.
SERVICE
No service is required and no service is to be performed
by the Customer. Only LaserLine Mfg., is authorized to
perform laser service. Any opening, tampering with, or
modifying the GL3000PMC Laser Housing by anyone
other than LaserLine Mfg., Inc. will void the warranty.
Under no circumstances, attempt to open or disassemble
the main Laser Housing.
The pneumatic air blast module may be opened for ser-
vice or valve replacement.
See page 3 item 10 for location.
INSTALLATION SUGGESTIONS
1. The laser must be mounted to a stable surface. If the la-
ser base is vibrating (too flimsy a mount) on the vehicle, the
vibration is magnified at the laser spot and can make it dif-
ficult to see. Stability of the laser mount is very important.
2. Do not mount the laser inside the cab and shoot the
laser beam through the windshield without the use of a
boot to prevent back scatter. Call the factory for details.
3. Do not mount the GL3000PMC laser unit in a location
that allows the laser beam to be directed to hit any mir-
ror like reflective surfaces on the vehicle such as mirrors.
WINTER OPERATION / SNOW PLOWS
MAINTENANCE, SERVICE & INSTALLATION SUGGESTIONS
Do
not
expose this Laser to:
• High pressure washing
• Car wash
CAUTION!
