LaserLine GL3000PMC-E Owner'S Manual Download Page 6

5

MAINTENANCE

The only maintenance that may be required is:

1.  Periodically clean the Exit Window of the GL3000PMC-E.  
Do this with a soft cloth. Do not use Kleenex or paper 
towels.  Be careful not to scratch the glass.

2.  Periodically blow the pneumatic lines to clear  
moisture from the system.

Note:  Always turn off power to the laser when cleaning 
the Exit Window.

 

SERVICE

No service is required and no service is to be performed 
by the Customer.  Only LaserLine Mfg., is authorized to 
perform laser service.  Any opening, tampering with, or 
modifying the GL3000PMC-E Laser Housing by anyone 
other than LaserLine Mfg., Inc. will void the warranty.

Under no circumstances, attempt to open or disassemble 
the main Laser Housing.  

The pneumatic air blast module may be opened for ser-
vice or valve replacement. 

See page 3 item 10 for location. 

INSTALLATION SUGGESTIONS

1.  The laser must be mounted to a stable surface.  If the 
laser base is vibrating (too flimsy a mount) on the vehicle, 
the vibration is magnified at the laser spot and can make 
it difficult to see.  Stability of the laser mount is very 
important.

2.  Do not mount the laser inside the cab and shoot the 
laser beam through the windshield without the use of a 
boot to prevent back scatter. Call the factory for details.

3.  Do not mount the GL3000PMC-E laser unit in a location 
that allows the laser beam to be directed to hit any mirror 
like reflective surfaces on the vehicle such as mirrors.

WINTER OPERATION / SNOW PLOWS

MAINTENANCE, SERVICE & INSTALLATION SUGGESTIONS

Summary of Contents for GL3000PMC-E














Reviews: