background image

7

Laser

 

 

 

 

 532nm Class 3B

Power

   

 12 or 24 Volt DC Positive or negative Ground

Power Draw

 

4.00 amps (Maximum Operating) 

 

 0.03 amps (sleep Mode)

recommended Ambient 

 

Operating Temperature   +36ºF to +120ºF  /  +2.2ºC to +48.8ºC 

  storage Temperature     -40ºF to +150ºF  /  -40ºC to +65ºC

Laser housing and Mount

 

  Height 

   

         15.6 cm (6-1/8 Inches) 

  Length   

             

               30.5 cm (12 Inches) 

  Width   Housing 15.6 cm (6-1/8 Inches) / Base 24.1cm (9-1/2 Inches)

cable Length From Laser housing to control Box

    6.1m (20 Ft)

12 or 24 volt Power cable Length from control Box 

4.6m (15 Ft)

Shipping Weight     

                                                            13.5kg (30 Lbs)

 

GL3000P-E SPEcIFIcATIonS

7

FAcTory SErvIcE cEnTEr 

LaserLine MFG., InC.  
1810 s.E. First street, suite H,  
Redmond, OR 97756, USA

Phone: 1-541-548-0882 
Fax: 1-541-548-0892 
Email: [email protected]

FAcTory SErvIcE: 

new Product Warranty service policy for new products stated above.

SErvIcE wArrAnTy: 

1 year on replacement Parts, 90 days on Labor.

For ALL wArrAnTy: 

Call 

order Processing

 for rMa #  at 1-541-548-0882. The unit will be re-

paired and returned by prepaid freight.

non-wArrAnTy  

send to: LaserLine MFG., InC. at above address.

GL3000P-E wArrAnTy

This product is guaranteed against defects in materials and workmanship with parts and labor, under 

normal working conditions from one year from the date of purchase, except as noted herein.

LaserLine Mfg., Inc. liability under this warranty is limited to repairing or replacing any product returned 

to an authorized service center for that purpose. any evidence of attempts to repair this unit by other 

than factory authorized personnel automatically voids the warranty.

warning!

 Under no circumstances, attempt to open or disassemble Laser housing. 

LASEr EMISSIon InForMATIon

Laser Source

 

 

 

 

 nd: YaG

Wavelength

 

 

 

 

 532nm

Full Aperture output Power

   

 <40mW (35mW Typical) 

7mm Aperture Power at 20cm Distance

  

 <5mW

Full Aperture Beam Diameter

   

 <25mm

Beam Diameter 1/E2

   

 14mm

Divergence

   

 <0.1mrad

Beam Mode (Profile)

   

 TEM00

Emission

   

CW or 2Hz

Laser class EU

   

 3B

Laser class USA

   

 IIIa

4.57m (15Ft)

7.62m (25Ft)

18.08cm (7"-1/8 Inches)

29.8cm (11"-3/4 Inches)

Housing 15.8cm (6"-1/4 Inches)/ Base 25.4cm (10" Inches)

Summary of Contents for GL3000P













Reviews: