LaserBit
Communications Co. Users’ manual of Combiner
v.:3.0
- 12 -
Warranty conditions
LaserBit
Communications Corp. warrants that the
LaserBit
product purchased
will free from defects in material and workmanship for a period of one (1) year from
the date of purchase. This warranty period will not be extended by virtue of a repair
of the product or a replacement of any component of the product during the
warranty period. This warranty covers only normal commercial use.
LaserBit
Communications Corp. is not responsible for warranty service should the
LaserBit
identification marks, serial numbers or original seals be removed, altered,
or broken, or should the product fail to be properly maintained or fail to function
properly as a result of any modification, misuse, abuse, improper installation,
neglect, improper shipping, damage caused by disasters such as fire, flood,
earthquake or lightning, improper electrical current, or service other than by
LaserBit
Communications Corp. or its authorized partners.
If the
LaserBit
product fails to operate as warranted at any time during the
warranty period,
LaserBit
Communications Corp. will repair, or at its option,
replace the defective product at no additional charge.
In no event will
LaserBit
Communications Corp. be liable for any damages
including loss of data, lost profits, lost savings, lost business, or other incidental or
consequential or indirect damages arising out of the installation, use, maintenance,
performance, failure or interruption of the
LaserBit
product, even if
LaserBit
Communications Corp. has been advised of the possibility of such damage. If you
purchased the
LaserBit
product in the United States, some states do not allow the
limitation or exclusion of liability for incidental or consequential damages, so the
above limitation may not apply to you.
The purchaser or user shall have the responsibility to give
LaserBit
Communications Corp. prompt written notice of any warranty claims. If the
product was purchased through an authorized partner of
LaserBit
Communications Corp., notice may be given in writing to that authorized partner
in the area in which the product was being used. The product may be returned to
LaserBit
Communications Corp. only if it has a Return Material Authorization
(RMA) number. The product must be shipped prepaid, insured and in the original
shipping package or similar package for safe shipment. The RMA number must be
marked on the outside of the shipping package. Any product returned without an
RMA number shall be rejected.
Transportation charges for the return of the product will be paid by
LaserBit
Communications Corp. if it is determined by
LaserBit
Communications Corp.
that the product was defective within the terms of the warranty; otherwise the
purchaser or user shall be responsible for costs of return handling and
transportation.
If the
LaserBit
product does not operate as warranted above, the customer’s sole
remedy shall be, at
LaserBit
Communications Corp.’s option, repair or
replacement. The foregoing warranties and remedies are exclusive and are in lieu of
