QUICK USER MANUAL SPK-WFADAPTOR
3
Option 1) Wi-Fi connection via WPS Mode
If your router has a WPS button, this is a simple and convenient way of connecting the speaker to the
network.
Press the WPS button on the router and press the SET (WPS) button briefly on the rear of the
SPK-WFADAPTOR to establish the connection.
Note: Please also refer to the instruction for the router.
The SPK-WFADAPTOR will now establish a connection with your network. The LED will flash rapidly
during this process. Once the connection has been made, the LED will turn solid White.
The SPK-WFADAPTOR can now play back audio signals from your network.
Note: The SPK-WFADAPTOR saves the connection data therefore they do not need to be re-entered the
next time it is switched on.
Option 2) Connecting to a network via the web interface
If it is not possible to connect to your network via WPS, you can use a web interface. You will need a
device which can access your wireless local network and an internet browser (e.g. a computer/
smartphone).
Note: Setup of your Wi-Fi Adaptor is very similar to the setup of your Wi-Fi Speaker. You can refer to
your Speaker Manual for further explanation of the below steps.
1)
Power on your SPK-WFADAPTOR and search for it on the open Wi-Fi networks listed on the
computer/ Smartphone.
(Note: For iPhone setup, please skip to step 3)
Note: XX-XX-XX following the model name in the SSID of the speaker stands for the last 6 characters of
the unique MAC address (hardware address) of the respective SPK-WFADAPTOR.
2)
Open the web browser and enter 172.19.42.1 in the address bar of the browser then press ENTER
to confirm. The web interface of the WLAN will appear:
3)
Enter a name for the SPK-WFADAPTOR by which you will be able to identify later e.g. “lounge” or
“kitchen”.
4)
Search in the list of available networks in the “network name” drop-down menu and select the
network to which you want to connect the SPK-WFADAPTOR.
5)
If the network router does not assign an IP address, switch the DHCP function off here and then
enter the IP address manually in the bottom boxes.
6) Then enter the network key, if required, and click on “CONNECT”.
The SPK-WFADAPTOR will now establish a connection with your Wi-Fi network. The White LED will
flash rapidly during this process. Once the connection has been made, the White LED will turn solid
and will stop flashing.
The SPK-WFADAPTOR can now play back audio signals from the network. The connection data will be
saved and therefore does not need to be re-entered next time.
