Laser SMT-APTDORLOC, User Manual

Page: 5 / 12

-©-
۞
Installation Guide
Right Hand Left Hand
Right Hand Revers
e
Left Hand Revers
e
Installation requirement
Door thickness requires 38 - 90mm.
Depth for latch is 100mm.
Outside
Inside
Outside
Inside
Outside Outside
Inside Inside
Tools Required
Pencil Tape Angle Rule
Drill Drill Bits Hammer
Knife Screw Driver Chisel
Drilling
Find a suitable place to drill on the door.
Make sure
the door lock has small amount of wiggle room in the
hole.
Note:
Do not close the door after installing lock, please first check
the lock and make sure it work
s properly e .g. Touch the screen
with your hand, input default password (123456#), then press
door lock handle and it should unlock.