TROUBLESHOOTING
NO IMAGE IS PROJECTED OR A
“NO SIGNAL” MESSAGE IS DISPLAYED
1.
Check the power light next to the power
button is on and green. If it’s red, then press
the power button to take the device out of
standby. If there is no light then check the
projector is plugged into the mains, and that
the socket is switced on.
2.
Check the lens cover has been removed.
3.
Check the cables are securely attached and
installed as per the User Manual.
4.
The image source may not be set
correctly. Press the Source button on the
Control Panel or the Remote, to select the
correct setting.
