Laser DVD-HD012, Instruction Manual

Page: 5 / 18

QUICK USER GUIDE
DVD-HD011
CONNECTING THE PLAYER

HDMI can transmit both audio and video signals over a single cable. If you
have an HDMI capable receiver that can support HDMI audio, you can
simply run an HDMI cable from the player to your receiver and enable
HDMI audio on the receiver (see your receiver’s owners’ manual for more
information). The receiver usually has an HDMI output that you can
connect to your TV to pass the video signal.

HDMI is a wonderful thing. A single cable can transport both audio AND
video from your player to your display. Be aware, however, that HDMI is
an evolving standard, and there could be compatibility issues. A receiver
that supports audio input over HDMI is required.
 Some receivers offer HDMI ports solely for video switching. If your receiver
does not have audio input capability, please read the following sections
regarding other connection methods.
 In order to play multi-channel audio for all formats, the receiver must
support HDMI v1.1 or later. A receiver that supports HDMI v1.3 with
decoding capability for Dolby TrueHD and DTS-HD Master Audio is
preferred. Please check the specifications of your receiver to ensure that it
meets the requirements.

Due to bandwidth limitations, high resolution audio formats such as Dolby
Digital Plus, Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master
Audio cannot be sent through the coaxial digital audio output. A reduced
resolution version of the same audio track will be output instead. To listen
to high resolution audio formats in their best quality, please use the HDMI
connection if you have a receiver that handles HDMI audio.
Instruction Manual
DVD-HD012