www.lasertools.co.uk
Full Test — Battery in Vehicle
Testing the Vehicle Battery
Now select
1.Battery Test
from
the Test in Vehicle
menu.
Select
2.Battery in Vehicle
from main menu.
If the instrument detects a surface charge condition in the battery, the
following screen is displayed:
Follow the instructions displayed, then press the ENTER key to continue.
www.lasertools.co.uk
Testing the Vehicle Battery
Select battery type
(info on battery label).
Now choose the
measuring range
for the battery; again, this information is
displayed on the label on top of the battery. Cycle up or down to choose the
correct measuring standard; for example EN, SAE or CCA.
Press ENTER to select the
measuring rate
.
If the battery label
indicates 500 CCA,
then choose
CCA
.
If the battery label
indicates 500 CCA,
then choose
500
.
The screen will display ‘
TESTING
’ for a few seconds. When the test is
completed, one of five results will be displayed (refer to previous
Quick Test
section for descriptions and diagrams for these results).
9
8