Add Points to a Saved Survey (1 of 2)
TruPoint 300
1. Set up on the last instrument position occupied when the original survey was
mapped.
2. Power on all equipment.
3. Open QuickMap and tap [Saved Surveys].
4. Tap . Wait a few seconds for the laser to respond and prompt for the leveling
routine.
5. Level the TruPoint. See Slide 19 for more information on that procedure.
6. Long-press the icon to display the re-zeroing dialog. A short press on this icon
implements the routine for moving your instrument position. Ensure that you see
the dialog as displayed in Figure A that
DOES NOT
say “Move to Point.”
