Calibrate the Tilt Sensor
(Models 360/B/R)
:
[1]
Press-and-hold
( )
, press until
( )
.
[2]
Press
( )( )
, press
( )( )
, press .
[3]
( )
, hold in position 1, press
( )
.
[4]
Hold in position 2, press
( )
.
[5]
Hold in position 3, press
( ).
[Hang 360 R buttons over an edge and press .]
[6]
Hold in position 4, press
( )
.
[7]
Hold in position 5, press
( )
.
[8]
Hold in position 6, press
( )
.
[9]
Hold in position 7, press
( )
.
[10]
Hold in position 8, press .
If
( )
, press and repeat steps 3 through 10.
If
( )
, press
( )
.
[2]
[5]
Always perform on a flat, fairly level surface. For the
TruPulse 360 R, you will need to use the edge of a
surface to access the buttons in position 3.
[1]
[3]
[8]
[7]
[6]
[4]
