4
Warning
：
Remind user of potential danger!
1. Please read this instruction carefully before installing this device.
2. Please obey the warnings on the device and the instruction.
3. During the process of transporting and using, please avoid strong vibration and
compress in order to protect the optic and electronic components.
4. Please use the power supply equipped by us and obeys the methods of instruction
to connect the wire.
5. Don’t open the device by yourself, or else it may cause electric shock or machine
damage. If there are problems, please contact us and remember that never try to
mend it by yourself.
6. In order to protect the machine and people, this device need to be settled on firm
pan-tilt.
7. Please install appropriate lightning proof equipment to avoid thunder.
8. Use this device within the limitation of humidity and temperature.
9. To protect the imaging components from damaging, please don’t let the camera aim
at sun and other objectives of high light or aim at static bright objectives for a long
time.
10.
Don’t look the laser window in close distance, or else it may hurt your eyes.
11.
This is a class 3B laser unit so it is dangerous for the eyes at short ranges. Do
never stare into the laser aperture at front.
Attention
1. Don’t hide the sensitive components in front of the machine in order to make sure
the device would work normally.
2. If the night vision device is out of power supply, please restart it after 30 seconds.
Laser Dome Camera LD200/400 PTZ
www.laseroptronix.se
