GyroView 3 Manual
Laseroptronix
Telephone office 0046-70 714 04 70
Enhagsslingan 23
187 40 Täby
Sweden
E-mail [email protected]
www.laseroptronix.se
Page 4
Fig. 1
For ease of operation, the device is fitted with neck strap (7) and
hand strap (1). Eyepieces (8), interpupillary adjustment lever (9)
and stabilizing mode engaging lever (5) are positioned on the
front panel (6) of the device. Power supply unit (2) is a
detachable part of the device.
Power supply voltage switch (4) and power supply control
indicator (3) are at the front of the device.
1 –cartridge with AA type batteries; 2 –connector;
3 –pin; 4 –cramp; 5 –delimiter; 6 –lock
Fig. 2 – Power Supply Unit
The device is powered by either a cartridge with batteries (1) or by an on- board power source 12± 1.2 V via
connector (2).
The power supply unit is attached to the device using delimiter(5) and lock (6).
Pin (3) opens the delimiter of the power supply unit.
Cartridge (1) with batteries is fixed in the power supply unit with cramp (4).
