- 3 -
Introduction
The ADM-1000 is an advanced hand-held or bench Optical Power Meter. It is used
in conjunction with one of a range of detector heads for measuring and displaying
optical power and waveforms.
The ADM-1000 may only be used with compatible detector heads. The range of
heads available includes photodiode and thermal types covering a range of
sensitivities and wavelengths.
Contact Laser 2000 UK Ltd for details on available detector heads.
Power Sources
The ADM-1000 may be powered from:
Internal battery pack;
DC power supply;
USB.
DC Power Supply
A DC power supply is included with the ADM-1000. The lead is connected to the
6VDC socket on the end of the ADM-1000, the power supply is then plugged into the
mains. The ADM-1000 will operate from the power supply regardless of whether the
battery pack is fitted or not.
The use of unapproved power sources should be avoided to prevent damage to the
power meter.
If the battery pack is fitted to the ADM-1000, the power supply will charge the battery
as well as operate the ADM-1000.
Battery Pack
The supplied NiMH battery pack fits to the rear of the unit. It is released by pressing
the tab at the back, and slid off.
The battery pack may be charged when it is attached to the ADM-1000 by plugging
in the DC power supply into the 6VDC socket on the ADM-1000. So long as the
power supply is connected and operating, the battery is charged even if the ADM-
1000 is switched off via it’s keypad.
