YOUR DATA LOGGER IS READY FOR USE
Ensure the batteries are correctly installed.
3
When setup is complete, the data logger should be disconnected from the USB port to
begin recording. If you would like advice on how best to use the data logger
for a particular application, please contact your nearest Lascar representative.
Do not leave your data logger connected to the USB port as this will cause some of
the battery capacity to be lost.
Double click on the EasyLog USB icon on your Windows™ desktop. This will load the
configuration software. Set-up the data logger for a new log, download a data logger that
has been recording, view previously saved data in graph format and check the
current status of the attached data logger (including the serial number).
Connect the data logger to an available USB port on your PC using the micro USB cable
provided.
●
●
●
●
●
