Basic data can be viewed on the
screen of the EL-WiFi-TH.
To view this data press the button
to cycle through the different
screens.
Thank you for purchasing a Lascar Electronics
EL-WiFi-TH sensor. This device measures the
temperature and humidity of the environment
in which it’s situated and transmits data to a PC
via WiFi. This quick start guide provides basic
information to help you use your new product.
Click on the EL-WiFi software icon which is
now on your desktop to open the package and
then click on the ‘Set-Up Sensor’ button. You
can now work through the different stages
of set-up which include establishing the WiFi
connection between your sensor and your PC,
Your sensor will arrive partly charged but
ideally you should charge it for 24 hours before
use for optimum performance.
Your sensor is already reading temperature
and humidity but it will not be configured
or connected to your WiFi network until you
complete the product set-up.
Your sensor is set-up using a free software
package called EL-WiFi which is available at
www.lascarelectronics.com. Once the software
is installed you’re ready to set-up your sensor.
Screen Cycle Button
USB Port
Signal Icon
Temperature Display
Humidity Display
Alarm Icon
Max/Min Icon
Battery Icon
Temperature Scale
Getting Started
Viewing Sensor Data
Getting to know your Sensor
Set-Up
Detailed information and graphical data needs
to be viewed via the EL-WiFi software package
already downloaded to your PC. Open the
package and click on the ‘View Sensors’ icon.
2. Max Recorded Values
3. Min Recorded Values
4. Signal Strength
OR
5. Data Syncing
1.Home Screen
naming each sensor, setting alarms, sample
rate and temperature scale.